Mini Mill

From HeatSync Labs Wiki
Revision as of 07:18, 3 September 2013 by en>Will (Created page with "=== Tutorial === ==== Vice Clamping ==== ==== Piece Clamping ==== ==== Mini Mill ==== ==== Cleaning ==== # Light Machine Oil # by Hand ==== Light Oil Examples ==== ==== Clampi...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Tutorial

Vice Clamping

Piece Clamping

Mini Mill

Cleaning

  1. Light Machine Oil
  2. by Hand

Light Oil Examples

Clamping Vice Overview

Closeup Clamp Angle

Use Washers if needed

Parallels

Putting in a piece

Chucking against not-square

R8 endmills and collets

  1. TiN vs HSS
  2. Aluminum vs Steel
  3. 2flute/4flute
  4. center-cutting / non-center-cutting
  5. damaged/new

Putting in endmill

Wrong length of endmill

Correct Length

Z-axis lock and gear

E-stop, speed

Pulleys (currently low speed)

Squaring

Edge finding / center finding

Center finding by hand

Climb cutting

Conventional cutting

Edge finding

Feeds, speeds, blue/gold chips

Retrieved from "https://heatsynclabs.wiki:443/index.php?title=Mini_Mill&oldid=3341"