File:Osb glue-up with bottom.jpg: Difference between revisions

From HeatSync Labs Wiki
Jump to navigation Jump to search
(Parts that will be cut to prepare for gluing-up an open-top box. This box can be made during the basic table saw class and also acts as one step in the arcade control class.)
 
(RobertBushman uploaded a new version of "File:osb glue-up with bottom.jpg": increased side height from 2.5" to 3")
(No difference)

Revision as of 23:03, 14 September 2022

Parts that will be cut to prepare for gluing-up an open-top box. This box can be made during the basic table saw class and also acts as one step in the arcade control class.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current03:56, 31 March 2024Thumbnail for version as of 03:56, 31 March 20241,536 × 864 (238 KB)RobertBushman (talk | contribs)

You cannot overwrite this file.

The following page uses this file:

Metadata

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Retrieved from "https://heatsynclabs.wiki:443/index.php?title=File:Osb_glue-up_with_bottom.jpg&oldid=6610"