File:Groover.jpg: Difference between revisions

Revision as of 00:15, 31 March 2024

This is a groover. Its purpose is to carve a small groove where the stitch line will go before stitching holes are chiseled. This allows a more low-profile stitch line in order to minimize abrasion in high-wear areas. The other option is placing a crease with wing dividers or a scratch awl.

File history

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Thumbnail	Dimensions	User	Comment
current	03:16, 31 March 2024		3,279 × 1,175 (216 KB)	RobertBushman (talk \| contribs)

You cannot overwrite this file.

File usage

The following page uses this file:

Leather Working

Metadata

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Camera manufacturer	samsung
Camera model	Galaxy S23 Ultra
Exposure time	1/60 sec (0.016666666666667)
F Number	f/2.2
ISO speed rating	100
Date and time of data generation	14:45, 29 July 2023
Lens focal length	2.2 mm
Latitude	33° 24′ 56.02″ N
Longitude	111° 50′ 4.19″ W
Width	4,000 px
Height	3,000 px
Orientation	Normal
Horizontal resolution	72 dpi
Vertical resolution	72 dpi
Software used	S918USQS1AWFD
File change date and time	14:45, 29 July 2023
Subsampling ratio of Y to C	2 2
Y and C positioning	Centered
Exposure Program	Normal program
Exif version	2.2
Date and time of digitizing	14:45, 29 July 2023
APEX shutter speed	0.016666666666667
APEX aperture	2.27
APEX brightness	3.3
APEX exposure bias	0
Maximum land aperture	2.27 APEX (f/2.2)
Metering mode	Center weighted average
Flash	Flash did not fire
DateTime subseconds	019
DateTimeOriginal subseconds	019
DateTimeDigitized subseconds	019
Color space	sRGB
Exposure mode	Auto exposure
White balance	Auto white balance
Digital zoom ratio	1
Focal length in 35 mm film	13 mm
Scene capture type	Standard
Unique image ID	f26497c2e5adbb2a0000000000000000
GPS tag version	0.0.2.2

Revision as of 03:51, 30 July 2023 (view source) en>Justinf (This is a groover. Its purpose is to carve a small groove where the stitch line will go before stitching holes are chiseled. This allows a more low-profile stitch line in order to minimize abrasion in high-wear areas. The other option is placing a c...)	Revision as of 00:15, 31 March 2024 (view source) RobertBushman (talk \| contribs) m (1 revision imported) Newer edit →
(No difference)

File:Groover.jpg: Difference between revisions

Revision as of 00:15, 31 March 2024

File history

File usage

Metadata

Navigation menu

Search