WoodShop Basic Table Saw Class: Difference between revisions
Jump to navigation
Jump to search
| Line 26: | Line 26: | ||
[[File:osb_glue-up_with_bottom.jpg|300x160px]] | [[File:osb_glue-up_with_bottom.jpg|300x160px]] | ||
* 1/2" OSB | |||
** 2@ 7.5" x 3" with 45 degree bevels, rough side in, and a .14 x .14 dado .125 from the bottom edge | |||
** 2@ 13.5" x 3" with 45 degree bevels, rough side in, and a .14 x .14 dado .125 from the bottom edge | |||
* 1/8" hardboard | |||
** 1@ 10.75" x 5.75" (wrong) | |||
== Ripping == | == Ripping == | ||
Revision as of 19:19, 14 September 2022
Overview
In this class (currently in development, not yet offered), you will learn:
- Safety
- Care & Cleaning
- Setup & Teardown
- Rip Cuts
- Dados
- Crosscuts
- Bevel Cuts
- Miter Cuts
Safety
Care & Cleaning
Setup & Teardown
Project
Final Product
Cut List
- 1/2" OSB
- 2@ 7.5" x 3" with 45 degree bevels, rough side in, and a .14 x .14 dado .125 from the bottom edge
- 2@ 13.5" x 3" with 45 degree bevels, rough side in, and a .14 x .14 dado .125 from the bottom edge
- 1/8" hardboard
- 1@ 10.75" x 5.75" (wrong)