Mini 60W Laser: Difference between revisions
en>DarrellW |
en>Gamebofh (→Logs: update) |
||
| Line 50: | Line 50: | ||
Please, log your work. This is important to understand maintenance needs, as well as building a database of materials and power/speed settings to make figuring out settings easier. | Please, log your work. This is important to understand maintenance needs, as well as building a database of materials and power/speed settings to make figuring out settings easier. | ||
* [https://docs.google.com/forms/u/0/d/e/1FAIpQLSdCqAez_T_orQlXTbbgQC_OeXvEhC7uHbVpiTnmfmoraFjPQA/formResponse Mini-laser work form] | * [https://forms.gle/sYVUxXivxsEqdEYp8 60W work form] | ||
* [https://docs.google.com/spreadsheets/d/1tDxqWNbrJ9M5UuvxpV4khA5Drt6HOfNuQRQbdNvYTxM/edit?usp=sharing 60W responses] | |||
== Old Logs == | |||
*[https://docs.google.com/forms/u/0/d/e/1FAIpQLSdCqAez_T_orQlXTbbgQC_OeXvEhC7uHbVpiTnmfmoraFjPQA/formResponse Mini-laser work form] | |||
* [https://docs.google.com/spreadsheets/d/1gItwjL4vfXwAsAQZ4dHuAlmoJ7lkLDme82yCei9KeF8/edit#gid=1432871391 Mini-laser work log] | * [https://docs.google.com/spreadsheets/d/1gItwjL4vfXwAsAQZ4dHuAlmoJ7lkLDme82yCei9KeF8/edit#gid=1432871391 Mini-laser work log] | ||
[[Category:Laser]] | [[Category:Laser]] | ||
Revision as of 02:35, 29 April 2022
Overview
This is the "smaller laser" It's a 60W CO2 laser
What you can cut
These lists are not exhaustive. If your material is not on either list, ask first!
- See the Laser Material Guidelines for a list of materials and common speed and power settings.
Lightburn Software
https://lightburnsoftware.github.io/NewDocs/index.html
Size
Bed dimensions are are approximately 70 cm x 50 cm
Turn on the laser
If you look at the machine, you'll see the key slot right on the front.
Yeah, you're going to ignore that. The switches on the side are where you actually need to turn it on. Get both of them.
Load the laser
Ok, there is a lot of information in this next photo, so I'll provide details after your eyes glaze over.
- Home position: This is where the laser will return to when you tell it to home.
- Laser pointer: This is where actual cutting happens. There is a positioning LED that is shining, but it is not the cutting laser.
- Z-axis knob: This system has manual bed leveling, and you'll use this to position the laser focus.
Focus the laser
The process for focusing the laser is the same for both lasers, the only difference is that you do it using the LaserCut 5.3 software on the PewPew9000 and you use the manual knob on this one.
Dump for notes
- Manual z
- LightBurn
Logs
Please, log your work. This is important to understand maintenance needs, as well as building a database of materials and power/speed settings to make figuring out settings easier.