LightBurn: Difference between revisions
Jump to navigation
Jump to search
en>Gamebofh (remove power material stuff since it's in the material page now) |
en>Gamebofh No edit summary |
||
| Line 12: | Line 12: | ||
* Fill + line: power/speed controls fill and then enables another line section | * Fill + line: power/speed controls fill and then enables another line section | ||
* If you can get it to "frame" but you click start and it just beeps at you, make sure you have some output chosen. (Image coming) | |||
* If you get "no object selected" or some other item, there is a different check mark (image coming) | |||
[[Category:Laser]] | [[Category:Laser]] | ||
Revision as of 00:09, 24 September 2020
- Can open SVG
- Middle button scroll
- cut image
- adjusted laser position on the panel
- Upload
- Start -says "Send the current design to the laser" in the tool tip, but it really means, start the laser.
- Can choose "output" to only cut certain portions
- Upload failed - run "frame" to get reinitiate
- Fill + line: power/speed controls fill and then enables another line section
- If you can get it to "frame" but you click start and it just beeps at you, make sure you have some output chosen. (Image coming)
- If you get "no object selected" or some other item, there is a different check mark (image coming)