Loldialer HeatSyncLabs Config: Difference between revisions

From HeatSync Labs Wiki
Jump to navigation Jump to search
en>Jjrosent
(Created page with "Welcome traveler! You're attempting to troubleshoot your Loldialer (tm) brand trolling device. If you have another brand trolling device or suspect your device might be count...")
 
m (2 revisions imported)
 
(One intermediate revision by one other user not shown)
Line 3: Line 3:
You're attempting to troubleshoot your Loldialer (tm) brand trolling device. If you have another brand trolling device or suspect your device might be counterfeit, please contact your manufacturer for support.
You're attempting to troubleshoot your Loldialer (tm) brand trolling device. If you have another brand trolling device or suspect your device might be counterfeit, please contact your manufacturer for support.


To test lets break it down into modules
Note 1: When in doubt reboot it, duh.
 
Note 1: Substitute your network info into any of these
 
*byte mac[] = {0x90,0xA2,0xDA,0x00,0xDE,0x22};
*byte ip[] = {172,22,110,97};
*byte gateway[] = {172,22,110,1};
*byte subnet[] = {255,255,254,0};
*byte server[] = {108,166,54,238};
 
Note 2: I've seen the loldialer not be able to run the ethernet (ie ping, etc) while also powering the lcd and or backlight. You'll want to be plugged into a dc adapter for this.
Note 2: I've seen the loldialer not be able to run the ethernet (ie ping, etc) while also powering the lcd and or backlight. You'll want to be plugged into a dc adapter for this.


The loldialer with current code from [Jacob's Repo https://github.com/jacobrosenthal/loldialer] will get DHCP and will report if it can't get an IP.
*Is internet up at hsl?
*Is internet up at hsl?
*Is the network cable still in good? Easiest things first, right? Swap it!
*Is the network cable still in good? Easiest things first, right? Swap it!
*Can you ping the loldialer from your computer? (IP above)
 
* Can the loldialer ping something (google?) Grab the example from http://arduino.cc/en/Reference/EthernetClient  You might have to change out their ip address for google as it changes occasionally. Use your system to ping google.com and replace whatever IP you get back to be sure
Does it say contact manufacturer?
*Is the loldialer server up and responding? Heatsync labs server is up at rs1.zyphon.com. You can actually initiate a loldial from your computer. Insert your 10 digit phonenumber below to troll yourself and guarantee the server is up http://50.56.124.136/~huertanix/cgi-bin/invoke_lulz.cgi?phone=XXXXXXXXXX&clip=rickroll
*Is the loldialer server up and responding? Heatsync labs server is up at rs1.zyphon.com. You can actually initiate a loldial from your computer. Insert your 10 digit phonenumber below to troll yourself and guarantee the server is up http://50.56.124.136/~huertanix/cgi-bin/invoke_lulz.cgi?phone=XXXXXXXXXX&clip=rickroll
Other than that
*Maybe it was dropped and wires are loose? I've labeled everything inside
*Is the LCD functioning? This hardware version (1?) uses the sparkfun lcd https://www.sparkfun.com/tutorials/246
*Is the LCD functioning? This hardware version (1?) uses the sparkfun lcd https://www.sparkfun.com/tutorials/246
*Does the button pad work? You need its library from in here, and theres test code in here. From the schematic you'll notice we use the default pins so the test sketch should just run http://playground.arduino.cc/code/Keypad
*Does the button pad work? You need its library from in here, and theres test code in here. From the schematic you'll notice we use the default pins so the test sketch should just run http://playground.arduino.cc/code/Keypad
*Can you reflash/update the code? You should already have the libraries (mainly the keypad) from above The v1 software is the master branch over at github https://github.com/huertanix/loldialer
*Can you reflash/update the code? You should already have the libraries (mainly the keypad) from above The v1 software is the master branch over at github https://github.com/huertanix/loldialer

Latest revision as of 20:29, 30 March 2024

Welcome traveler!

You're attempting to troubleshoot your Loldialer (tm) brand trolling device. If you have another brand trolling device or suspect your device might be counterfeit, please contact your manufacturer for support.

Note 1: When in doubt reboot it, duh. Note 2: I've seen the loldialer not be able to run the ethernet (ie ping, etc) while also powering the lcd and or backlight. You'll want to be plugged into a dc adapter for this.

The loldialer with current code from [Jacob's Repo https://github.com/jacobrosenthal/loldialer] will get DHCP and will report if it can't get an IP.

  • Is internet up at hsl?
  • Is the network cable still in good? Easiest things first, right? Swap it!

Does it say contact manufacturer?

Other than that

  • Maybe it was dropped and wires are loose? I've labeled everything inside
  • Is the LCD functioning? This hardware version (1?) uses the sparkfun lcd https://www.sparkfun.com/tutorials/246
  • Does the button pad work? You need its library from in here, and theres test code in here. From the schematic you'll notice we use the default pins so the test sketch should just run http://playground.arduino.cc/code/Keypad
  • Can you reflash/update the code? You should already have the libraries (mainly the keypad) from above The v1 software is the master branch over at github https://github.com/huertanix/loldialer