Latest revision as of 21:24, 11 May 2024

Resources

2024-04-21 - 11s - Starting with the standard green transparent settings, I tried increasing normal layer exposure from 8 seconds to 11. It fixed some trouble I was having with fine detail being too weak to hold together. My next test will be increasing exposure time to 14 seconds; I still had a few tiny sections where the detail failed. - Bob Bushman

@@ Line 1: / Line 1: @@
 = Resources =
 * [https://www.elegoo.com/products/elegoo-mars-lcd-3d-printer Elegoo Mars Product Website]
+* Resin Settings
+** https://www.elegoo.com/blogs/3d-printer-user-guide/elegoo-printers-resin-setting-sheet
+** https://drive.google.com/file/d/1_jnyMfNkm4sPJhKyN46ey5CO-ks4MRyR/view
 = Settings I Tried =
 == Normal Layer Exposure ==
-* 2024-04-21 - 11s - Starting with the standard green transparent settings, I tried using 11 second normal layer exposure instead of 8. It fixed some trouble I was having with fine detail being too weak to hold together.
+* 2024-04-21 - 11s - Starting with the standard green transparent settings, I tried increasing normal layer exposure from 8 seconds to 11. It fixed some trouble I was having with fine detail being too weak to hold together. My next test will be increasing exposure time to 14 seconds; I still had a few tiny sections where the detail failed. - Bob Bushman