Ultimaker: Difference between revisions

Latest revision as of 20:30, 30 March 2024

The Ultimaker is running, pending upkeep by User:Dfarms.

Take a look at our Ultimaker Quickstart Guide for your five minute crash course on the Ultimaker 3D printer.

I'd Really like to update our machine to the Ultimaker 2 at some point.

Switched to E3d metal hot end with new bowden clamp system
Added Heated bed to allow for printing with different materials and allowing larger prints

@@ Line 1: / Line 1: @@
-'''The Ultimaker is currently running at 100%'''
+'''The Ultimaker is running, pending upkeep by [[User:Dfarms]].'''
 == Basics ==
@@ Line 8: / Line 8: @@
 == Future Plans ==
-[[User:Rrix|I'd]] love to work on this [http://www.thingiverse.com/thing:31066 awesome cassette extruder], but don't want to take the machine down until the [[Fakerbot]] is working better.
+[[User:Dfarms|I'd]] Really like to update our machine to the Ultimaker 2 at some point.
+== Tasks ==
+* Clean Hot end every month
 == Upkeep Log ==
+=== 8 June 2014 ===
+* Switched to E3d metal hot end with new bowden clamp system
+* Added Heated bed to allow for printing with different materials and allowing larger prints
+=== 30 November 2012 ===
+* New PEEK tube turned on Lathe by colin
+* Colin installed the Makerbot mk6 extruder drive
+* Prints back up to installed quality.
+=== 14 November 2012 ===
+* Machine down pending new PEEK from Colin and Jake
 === 18 October 2012 ===
-* Set up remote gcode generation through dropbox
+* Set up remote gcode generation through dropbox (contact [[User:Rrix]])
-* Begin logging
+=== 12 October 2012 ===
+* Flashed Marlin Rev2.0 on to machine
+* Set up RepetierHost for GCode generation
+[[Category:3D-Printing]]